Focus EV to use Liquid Cooled Battery

Ford announced September 2 its Focus Electric, due out next year in the U.S., will contain a lithium ion battery pack with a liquid-based thermal management system.

Ford will use for the Focus a lithium-ion battery pack which will use heated and cooled liquid to handle one of the most dreaded things in an EV: overheating batteries. The liquid will be used by the car to keep the heat level to a minimum, hence increasing both the range and life span of the pack.

Ford is still developing the car, but the prototype we drove had a 23 kilowatt-hour lithium ion pack, which makes it about the size of the air-cooled pack in the Nissan Leaf. By using active thermal management, Ford says it will maximize battery life and range and optimize charging by heating, or cooling, the pack to the best temperature before pulling juice from the grid.

The introduction of this type of electronic cooling, will extend the batteries lifespan and also help to gain the maximum performance. By keeping the cells cool the active thermal management will be able to prevent the likelihood of cracks in the electrodes. These cracks can start to effect the batteries power and reduce the charge capabilities. On initial plug-in the management system will run a precondition of the batteries before it allows charging to begin.

The Focus Electric, which will be released in the U.S. late this year and in 2012 in Europe, is one of five electrified vehicles Ford will release over the next three years. The Ford Transit Connect Electric small commercial van arrives in late 2010, followed by two next-generation hybrid electric vehicles, as well as a plug-in hybrid electric vehicle in North America in 2012 and Europe in 2013.

Source: Ford




Press Release

FORD USES INNOVATIVE LIQUID-COOLED BATTERY SYSTEM TO HELP FOCUS ELECTRIC OWNERS MAXIMIZE RANGE

• The all-new Ford Focus Electric, which debuts in late 2011 in the U.S. and 2012 in Europe, will be powered by a lithium-ion battery system that utilizes cooled and heated liquid to regulate battery temperature, extend battery life and maximize driving range
  
• The innovative thermal management technology helps the Focus Electric operate efficiently in a range of ambient temperatures
  
• Focus Electric is one of five new electrified vehicles Ford will deliver over the next three years in North America and Europe. The Focus Electric will be built at Ford's retooled Michigan Assembly Plant
  

DEARBORN, Mich., Sept. 2, 2010 – The all-new Ford Focus Electric, which debuts in the U.S. late next year and in Europe in 2012, will be powered by an advanced lithium-ion battery that utilizes heated and cooled liquid to help maximize battery life and gas-free driving range.

Thermal management of lithium-ion battery systems is critical to the success of all-electric vehicles because extreme temperatures can affect performance, reliability, safety and durability. Ford has chosen an advanced active liquid-cooling and heating system to regulate the temperature of its lithium-ion battery packs, which are designed to operate under a range of ambient conditions.

"All-electric vehicles do not have a conventional engine on board, so it is critical we maximize the performance of the battery under various operating temperatures," said Sherif Marakby, Ford director, Electrification Program and Engineering. "Active liquid systems are more effective than air systems at regulating lithium-ion battery temperature. As a result, the active liquid system on Focus Electric will play a key role in providing our customers with the best performance possible."

The active liquid cooling and heating system also enables the Focus Electric to automatically precondition the battery pack temperature during daily recharging. When the vehicle is plugged in to the power grid, the vehicle system will be able to warm up the battery on cold days and cool it down on hot days.

The Focus Electric will be built at Ford's retooled Michigan Assembly Plant and will be available in late 2011. The vehicle will have an expected range of up to 100 miles and use no gasoline at all.

Battery thermal management in action
While air-cooling methods work well for many of today's smaller car battery systems, the larger, more complex lithium-ion battery technology powering Ford's all-electric vehicles calls for an aggressive thermal management system.

An active liquid system heats or chills a coolant before pumping it through the battery cooling system. This loop regulates temperature throughout the system against external conditions.

On hot days, chilled water absorbs heat from the batteries, dispersing it through a radiator before pumping it through the chiller again. On cold days, heated water warms the batteries, gradually bringing the system's temperature to a level that allows it to efficiently accept charge energy and provide enough discharge power for expected vehicle performance.

"Extreme temperatures impact a battery's life and performance, making it crucial to have an effective cooling and heating system to regulate temperature for these demanding applications," said Anand Sankaran, Ford executive technical leader, Energy Storage and HV Systems.

The liquid cooling system also plays a role in charging the vehicle. When the all-electric Focus is plugged in to recharge, the vehicle control system will automatically precondition the battery, if needed, to the optimal temperature before accepting charge. If the battery is already at the optimal temperature, the system will automatically accept charge and maintain an optimal temperature.

"We are working closely with our technology partners to accelerate the development of our lithium-ion battery systems to help our future EV customers get the most out of their vehicles," Marakby said. "Our goal is to build an electric vehicle that delivers on the quality and performance customers have come to expect from Ford."

Focus Electric is one of five electrified vehicles Ford will release over the next three years. In addition to the Focus Electric, the Ford Transit Connect Electric small commercial van arrives in late 2010, followed by two next-generation hybrid electric vehicles, as well as a plug-in hybrid electric vehicle in North America in 2012 and Europe in 2013.

Electrified vehicles are one part of Ford's broader strategy to offer a wide range of environmentally friendly, advanced technology solutions to improve fuel economy and lower CO2 emissions affordably for customers around the world.

Porsche Panamera Personalization Program

The North American division of The German carmaker has announced today it will begin offering a new personalization program starting this fall, including a Panamera Turbo Powerkit, a Sport Design Package and 20-inch Panamera Sport Wheels.

The top-rung Panamera Turbo can now be had with a Powerkit package that uses two new turbochargers and revised engine mapping to offer 40 more horsepower and 37 more pound-feet of torque over the standard Turbo, totaling 540 and 553, respectively. What's more, the Powerkit treatment includes Porsche's Sport Chrono Turbo Package, and if the car is driven in Sport Plus mode, torque output is further increased to 590 lb-ft. That's a whole lot of twist. This Holy Grail of Panameras will sprint to 62 miles per hour in just 3.9 seconds on its way to a top speed of 190 mph, yet it still manages to keep the Turbo's EPA-rated city/highway fuel economy of 15/23 miles per gallon.

The Porsche Panamera Personalization program also includes the Sport Design Package which features widened black air intake grilles, separate side skirts and an exterior color painted front end. The Sport Design Package price is 4,581.50 EUR and the new side skirts can be installed for an additional 969.85 EUR.

The new 20-inch light alloy multi-spoke wheels for the Panamera are 9.5 inches wide on the front axle and 11.5 inches on the rear axle. They are available from Porsche Exclusive in GT silver metallic, black, or in the exterior car color. They also will be available from Porsche Tequipment in GT silver metallic and black.




Press Release

Porsche Announces New Panamera Personalization Program

Available Porsche upgrades include a Panamera Turbo Powerkit, a Sport Design Package and 20-inch Panamera Sport Wheels

ATLANTA – Aug. 17, 2010 – In September Porsche will begin offering a Panamera Turbo Powerkit that increases engine output to 540 horsepower (standard is 500 horsepower). Other personalization upgrades include a Sport Design Package and the new 20-inch Panamera Sport wheels for the Panamera Turbo and the other Porsche V6- and V8-powered Panamera models.

The Panamera Turbo Powerkit features two new turbochargers with titanium aluminum turbines, and engine management has been adapted to provide a further improvement in engine response. Maximum torque rises to 750 Nm (compared to 700 Nm in the standard production Panamera Turbo). If in Sport Plus mode, which is included in the Sport Chrono Turbo Package that is part of the Panamera Turbo Powerkit, torque rises to 800 Nm. This is an increase of 30 Nm over the standard Panamera Turbo fitted with the optional Sport Chrono Turbo Package and in Sport Plus mode.

In Sport Plus mode, the Panamera Turbo accelerates from 0 to 100 km/h (0 to 62 mph) in 3.9 sec – 0.1 sec faster than the production car. Top test track speed is 305 km/h compared with 303 km/h (188 mph) in the standard Panamera Turbo. In line with Porsche Intelligent Performance – more power with less fuel and less emissions – a Panamera Turbo with the Powerkit consumes no more fuel than the 500-horsepower production model. The official EPA fuel economy figures for the Panamera Turbo are 15 mpg city and 23 highway, and like its Panamera siblings the Panamera Turbo is not subject to the gas guzzler tax.

As a Porsche Exclusive option, the Powerkit is available next month for $21,730. Porsche Tequipment will offer the Powerkit as a retrofit upgrade beginning in November 2010.

Porsche also offers its Panamera customers its new Sport Design Package that includes a unique, exterior color painted front fascia with widened black air intake grilles. Other components include separate side skirts and the standard, exterior color rear underbody apron with diffuser and fins. Available in October 2010 as a Porsche Exclusive option or a Porsche Tequipment retrofit upgrade, the Sport Design Package is $4,590. On request, side skirts are available separately for $1,390.

Porsche also now offers the new 20-inch Panamera Sport wheels. The light alloy multi-spoke wheel is 9.5 inches wide on the front axle and 11.5 inches on the rear axle. They are available from Porsche Exclusive in GT silver metallic, black, or in the exterior car color. They also will be available from Porsche Tequipment in GT silver metallic and black.

The Panamera Turbo Powerkit is only available on the Panamera Turbo. The Sport Design Package and the Panamera Sport Wheels are available on all Porsche Panamera models (Panamera, Panamera 4, Panamera S, Panamera 4S and Panamera Turbo). Pricing varies by model.

Since its U.S. introduction in October 2009, the Panamera has received numerous awards and recognition. The Panamera Turbo was named Playboy Magazine's 2010 Car of the Year. Others include an Edmunds Inside Line Editors' Most Wanted Award, inclusion in Edmunds.com's Top Recommended Vehicles list, two Car and Driver Editors Choice Awards (Sports Sedans and Luxury Sedans), inclusion in kbb.com's list of 2010 Top 10 Road Trip Cars, Bloomberg Car of the Year, the Most Inspired Design award in Ward's Auto Interior of the Year competition, About.com Cars Best New Cars of 2010, and NADAguides.com's Car of the Month for January 2010.

2010 Suzuki Bonneville Kizashi

The North American division of Suzuki has just Releases details on a special edition Kizashi model,

Suzuki’s North American division revealed that the Bonneville Kizashi started with a pre-production Kizashi prototype. Last May, construction of the Kizashi racer started with the Holdener/Habrzyk team installing the SCTA-approved roll cage, an aluminum bulkhead in the rear, racing seat, seat harnesses and window net. When it comes to performance, the Bonneville Kizashi is equipped with a new intake manifold, a tuned ‘long tube’ header and forged rods and pistons.

The car is powered by a 2.4-liter, four-cylinder, 16-valve DOHC engine that delivers 500 wheel hp at 7000 rpm and 420 lb.-ft. of torque. It also gets a new intake manifold, a tuned ’long tube’ header, forged rods and pistons, a Turbonetics turbocharger, a new 3.5-inch exhaust, and full synthetic 5W-20 racing oil from Lucas Oil. It’s main target will be to hit a top speed of 200 mph.

The Bonneville Suzuki Kizashi is currently undergoing testing and will hit the salt flats on August 14.


Press Release

BONNEVILLE KIZASHI – SOMETHING GREAT IS RUNNING

• Bonneville Kizashi builds on Suzuki’s winning tradition.

• Boosted powertrain moves sport sedan into new segment – Over 200 mph.

• Modifications void America’s #1 Warranty.

BREA, Calif. (August 9, 2010) – Since its introduction to the press in July of 2009, Suzuki’s Kizashi has been recognized as a midsize sedan with a difference – or two. Boasting a rigid structure, composed platform, suspension tuned on the famed Nurburgring and available all-wheel drive, the Kizashi has enjoyed accolades from both media and consumers; most notably, the Kizashi ranked first in AutoPacific’s 2010 Vehicle Satisfaction survey. And with 185 horsepower from its 2.4 liter DOHC four, the 2010 Kizashi boasts class-leading power in the four-cylinder segment.

Fast forward to August 2010, and Suzuki moves the Kizashi into a category typically reserved for Bonneville streamliners. With extensive modifications supplied by Richard Holdener and Tom Habrzyk of Advanced Product Engineering and with Road & Track’s Sam Mitani behind the wheel, American Suzuki’s first-ever automotive assault on the salt begins on August 14 in Wendover, Utah. There, the Bonneville Kizashi – competing in the Blown Gas Coupe category – will rocket its way toward the 200 mph benchmark and, if successful, into Suzuki’s already remarkable motorsport history.

The Bonneville Kizashi began with a pre-production Kizashi prototype. In May 2010, construction of the Bonneville racer began with interior disassembly, underscoring Kizashi’s initial design premise. “Premium without the premium” is, suddenly, completely without the premium, reflecting a bare metal working environment intended for but one mission. Its upscale appointments removed, the Holdener/Habrzyk team installed the SCTA-approved roll cage, an aluminum bulkhead in the rear, racing seat, seat harnesses and window net.

With the cockpit modifications made, it was time to take a look under the hood and build on, with this Kizashi, the performance tradition rooted in Suzuki’s first win on Mt. Fuji some 55 years ago. The spare motor was disassembled to confirm the stock measurements, while the cylinder head was flowed and ported. The Bonneville Kizashi benefits from a new intake manifold, a tuned ‘long tube’ header and – for high rpm durability – forged rods and pistons. With up to 20 pounds of boost from the Turbonetics turbocharger, the Kizashi’s increased horsepower required air-to-water intercooling (and Snow water/methanol injection) – while its output demands a new ACT Clutch and Pressure Plate. A scattershield is added, the oil pan is welded for a new drain fitting and a new 3.5-inch exhaust is fabricated aft of the turbocharger. Additional protection for the high-boost, high-rpm turbo motor is provided by full synthetic 5W-20 racing oil from Lucas Oil.

The Kizashi platform – and its Nurburgring heritage – is morphed into a salt-specific recipe with new coilovers, steel wheels seam welded, and speed-specific 15x7-inch Goodyear Front Runner® rubber. An air dam keeps the Kizashi’s nose planted, window straps and hood pins ensure the hood and glass stay in place, and a parachute can bring the high speed show to an emergency stop. Finally, a dual fire system provides the extra assurance so important for Mitani, with some 900 boosted horses but only a few feet in front of his now high-speed capsule.

With the build completed at the end of July, the first week of August provides a narrow window for the chassis dyno tune and over-the-road (closed course, professional driver) testing. Then it’s on to Bonneville and the week of speed, beginning Saturday, August 14 and ending on Friday, August 20. If the week goes as planned, and the Kizashi performs as designed, the SCTA will have two new members among its 200 mph ranks: Road & Track’s Sam Mitani and the 2010 Suzuki Bonneville Kizashi .

Technical Specifications – 2010 Bonneville Kizashi

Wheelbase:	106.3 inches
Overall Length:	183.1 inches
Overall Width:	71.7 inches
Engine:	2.4-liter, four-cylinder, 16-valve DOHC engine
Horsepower:	500 wheel hp @ 7000 rpm
Torque:	420 lb.-ft. @ 5100 rpm
Transmission, Manual:	Six-speed manual transmission
Brakes:	Front ventilated disc brakes/Rear disc brakes
EPA Fuel Economy Estimates:	EPA test cycle does not include 200 mile-per-hour evaluation

2011 Chevrolet Cruze Price Starts at $16,995

GM announced today(June 3) the prices and detailed the trim levels in which the 2011 Chevrolet Cruze will be available starting this September, The USA market version of the 2011 Chevrolet Cruze comes in four different trim levels: LS, LT, Eco and LTZ.

The 2011 Chevrolet Cruze will replace Cobalt as the compact car from General Motors' volume division. Cruze is a 4-door sedan that comes in LS, LT, LTZ, and fuel-economy-oriented Eco trim levels. The LS has a 136-horsepower 1.8-liter 4-cylinder engine. The LT, LTZ, and Eco use a 138-horsepower turbocharged 1.4-liter 4-cylinder engine.

A 6-speed manual or 6-speed automatic transmission is available on all. Available safety features include ABS, traction control, antiskid system, curtain-side airbags, and front- and rear-side airbags.

The LS and LT have 16-inch wheels; 17-inch wheels are standard on the LTZ and Eco; and 18-inch wheels are optional on the LT and LTZ. Among the available features are a wireless cell-phone link and navigation system. Cruze Eco models have ultra-low-rolling-resistance tires and other aerodynamic tweaks designed to increase fuel economy. Available on the LT and LTZ is an RS Appearance Package, which includes specific wheels and exterior trim.


The Chevrolet Cruze US price starts at 16,995 USD for the LS model and goes up to 22,695 USD for the top of the range model.
For the Eco trim level, the Chevrolet Cruze US price starts at 18,895 USD. The manufacturer believes the Chevrolet Cruze Eco will offer a 40 miles per gallon fuel economy on the highway. Also for an improved efficiency, the Chevrolet Cruze Eco is fitted with low-rolling resistance tires and an enhanced aerodynamic performance package.


Press Release:

Starting at $16,995, Chevrolet Cruze Offers Midsize-car Presence at Compact-car Price

DETROIT, MI – The all-new 2011 Chevrolet Cruze will begin arriving in U.S. dealerships this September, starting at $16,995, including destination. Priced to compete in the compact-car segment, the Cruze offers more interior room, more miles per gallon in the Eco model, and more standard safety features than any of its competitors.

"We believe the Cruze can redefine the expectations for compact-car owners and shoppers who are new to the segment," said Jim Campbell, U.S. Vice President of Chevrolet Marketing. "For the price of a compact car, Cruze offers the styling, safety features, roominess, amenities, and refinement of a much more expensive car."

The 2011 Cruze will be offered for retail sale in four models:

Cruze LS starting at $16,995, including:

• Standard 1.8L Ecotec engine and six-speed manual transmission
• The most standard safety features in the segment, with 10 air bags, StabiliTrak electronic stability control with rollover sensing, traction control, anti-lock brakes, collapsible pedal system, power rear-door child safety locks
• Standard OnStar, with a six-month subscription including Turn-by-Turn navigation
• Standard convenience features including air conditioning, power windows, power door locks with remote keyless entry, driver information center, and XM Radio with three month trial subscription

Cruze LT starting at $18,895, including:

• Standard 1.4L Ecotec turbo and six-speed automatic transmission
• 16-inch wheels

Cruze Eco starting at $18,895, including:

• Standard 1.4L Ecotec turbo and six-speed manual transmission
• Segment-leading expected 40 miles per gallon highway
• Standard 17-inch alloy wheels with ultra low-rolling resistance tires, and enhanced aerodynamic performance package

Cruze LTZ starting at $22,695, including:

• Standard 1.4L Ecotec turbo and six-speed automatic transmission
• Standard six-way power driver seat, leather seating surfaces, leather-wrapped steering wheel and shift knob
• Standard cruise control, Bluetooth phone connectivity, USB port with audio interface, steering-wheel mounted audio controls, and remote vehicle start
• Standard automatic climate control, auto-dimming inside rearview mirror, and ultrasonic rear-parking assist
• 18-inch alloy wheels

Major available options features on Cruze include:

• In-dash navigation system with 40-gigabyte hard drive, enabling pause-and-play radio, downloading of audio CDs, or transferring MP3 files from a USB memory device
• Pioneer Audio system, with nine speakers and 250-watt amplifier
• Heated leather seats
• Ultrasonic rear park assist
• RS Appearance package, including rocker moldings, unique front and rear fascias, front fog lamps, and rear spoiler

"Cruze is a truly global car that leverages Chevrolet's design and engineering capabilities. As a result we can offer customers more standard safety features, more miles per gallon, and more upscale features than our key competitors," Campbell said. "That formula made Cruze a hit overseas, with more than 200,000 customers choosing Cruze since it went on sale in 2009."

Cruze will offer customers more standard equipment and amenities than the competition. "While some of our competitors may have a lower starting price, Cruze wins on value once these competitors are optioned up." said Campbell.

Official:VW Polo Sedan Debuts in Russia

Volkswagen has unveiled the VW Polo Sedan and released a set of official photos with the new model which will be offered with only one engine option and available exclusively for the Russian market.

Power for the 2011 Volkswagen Polo Sedan comes from a 1.6L Otto 4-cylinder engine making 103-hp. The Polo Sedan can be equipped with a 5-speed manual gearbox or a 6-speed automatic gearbox with sequential shift function. That makes Volkswagen the first automaker to offer Russian customers an up-to-date automatic gearbox in the segment.

Assembly for the VW Polo Sedan will take place at the Kaluga plant in Russia and as far as active safety systems the car will be offered with 2 airbags, head rests and 3-point seat belts for all its passengers plus ABS on the Comfortline trim level and up and ESP and side air bags on the Highline version.   

The Polo sedan is being assembled at VW's Kaluga plant. It will be marketed in Russia in three trim levels: Trendline, Comfortline and Highline.

It will retail in Russia for just a tad over 10,000 euro ($14,600).

Press Release:

World premiere of the Polo Saloon in Moscow

- A first: a Polo specially developed for the Russian market
- Moderate pricing: quality and reliability for a wide circle of customers

Wolfsburg / Moscow, 02 June 2010 – While advance sales began for the Polo produced in Kaluga, Russia, the world premiere took place before 200 high-ranking guests in Moscow today. For the first time in the history of the brand, a vehicle has been developed specially for the Russian market, bearing in mind its specific climate and street conditions.

Frank Wittemann, Head of the Volkswagen Brand in Russia: “The new Saloon extends Volkswagen’s range of vehicles und builds a bridge from our bestsellers in Russia, the Passat and the Jetta, to the small familiy car segment. With it, an even greater number of friends of our brand can choose a vehicle according to their taste and possibilities. The new vehicle complies with the global quality standards of Volkswagen in every respect, while being very attractive in terms of price: The Polo Saloon is being offered at a price from just a bit over 10,000 euros and up.”

The new Saloon is being built on a completely new assembly line at Volkswagen AG’s plant in Kaluga. The Volkswagen Polo is equipped with a new 1.6-litre Otto engine (77 kW / 105 PS). It can be combined with a 5-gear manual gearbox or a 6-gear automatic gearbox with sequential shift function (Tiptronic). Hence Volkswagen is the first automobile manufacturer offering their Russian customers such an up-to-date automatic gearbox in this vehicle class.

A high level of safety is ensured already in the Trendline basic version-two airbags, head rests and three-point seat belts for all five passengers. From Comfortline and up, the Polo is equipped with ABS as standard. In the Highline top version, additional safety systems are integrated that are normally unavailable in this class-for instance: side air-bags and ESP.

The specific demands of Russian drivers and the climate and street conditions in Russia have both been carefully taken into account during the new Saloon’s development: long-term tests were conducted in different climate zones, and the street conditions in the most variegated regions in Russia were examined. The available petrol qualities were tested repeatedly as well. Thus the vehicle has been equipped with an up-to-date and reliable engine that is ideally suited to those operating conditions prevailing in Russia, a galvanised, non-corrosive body and a wheel suspension geared to bad roads. Particularly robust paints were used for the car’s paint job, and the chrome parts are also highly resistant to aggressive agents.

Carbon Motors claims 14,000 reservations for E7 police car [Video]

Carbon Motors will put its E7 Police Car into production in 2012 and the brave men and women of the law enforcement, City Mayors, Managers and Council Members, the State Controllers and even the Federal Government are starting to recognize the benefits of this diesel police interceptor that will carry a BMW diesel engine.



In its latest newsletter update, Carbon Motors has revealed that it's received over 14,000 reservations from over 400 police agencies for its new purpose built E7 police car. However, it's best to bear in mind those are just reservations for slots in the production schedule. As of yet, no one has placed a firm order for the E7 because Carbon hasn't even announced pricing. While the concept of a vehicle built specifically to meet the needs of police forces certainly sounds good on paper, the E7 will undoubtedly be expensive.



The Carbon Motors E7 will be powered by a diesel engine from BMW. The twin-turbocharged diesel unit, which is also used in the BMW X5 xDrive35d and the BMW 335d, will produce 265 horsepower and 425 pound-feet of torque. So far Carbon Motors has ordered 240,000 of these engines from BMW.













Press Release:



Carbon Motors: A Catalyst for Change



New Entrants into Market Raise the Question, "What's the Difference?"



It has long been assumed that law enforcement professionals – police, sheriff's deputies, state patrol, etc. – operate real "police cars", yet there has never been any proof backed up with logic to show why this statement might be true (or in this case false) in the first place. It is a myth. Law enforcement organizations have never been offered a purpose-built solution because one never existed anywhere in the world until Carbon Motors came along with world's first and only purpose-built law enforcement patrol vehicle.



With the help of over 3,500 US law enforcement professionals from all 50 States representing the local, state and federal levels, Carbon Motors wrote the groundbreaking specifications for such a vehicle. Based on this comprehensive list, it became evident that modifying a retail passenger car would not suffice – from interior space requirements, to vehicle performance, to the use of advanced homeland security technologies, to the long-term durability based on law enforcement usage patterns, to the fuel efficiency, to the required safety attributes and the list goes on and on and on. Carbon Motors decided to develop an all-new, ground-up homeland security platform for the United States of America "Designed by Law Enforcement, Exclusively for Law Enforcement."



What Really is "Purpose-Built"?



Purpose-built quite simply means, "exclusively built for a particular purpose" – a superior product built from the ground-up with one sole mission, dedicated and committed to one set of professional users. Our country builds purpose-built vehicles to put out fires, go into battle, clean our streets, collect our trash and deliver our mail. Why not a purpose-built vehicle, then, for patrolling our roadways, protecting our communities, and securing our homeland?



The F-35 Joint Strike Fighter, the MRAP All-Terrain Armored Vehicle, an emergency fire truck, a SWAT armored rescue vehicle, and the Carbon 'E7' – these are purpose-built vehicles on a very serious, clear and singular mission. The Carbon E7 is in fact so serious, that it will have a positive and material effect on at least six of President Obama's cabinet-level departments including the Departments of Labor, Energy, Homeland Security, Justice, Transportation, and Treasury. From creating thousands of new American jobs of national importance, to reducing our dependence on foreign oil, to better securing our homeland, and even reducing taxpayer burden regarding the approximately $100 billion the United States of America will spend on law enforcement vehicle operations over the next decade.

Demand is Unquestionable – 14,000 Reservations Says So!



Clearly, the brave women and men of law enforcement, the City Mayors, Managers and Council Members, the State Controllers and even the Federal Government all recognize the benefits of a purpose-built vehicle. And they have all backed it up in writing. Carbon Motors has surpassed 14,000 production slot reservations for the Carbon E7. These reservations were made by over 400 law enforcement agencies in 48 US States, representing each functional area of law enforcement. At this rate, Carbon Motors fully expects to have production sold out well in advance of the first vehicle rolling out of the Carbon Campus in Connersville, Indiana.



51st stop on Pure Justice Tour Features Ride-and-Drive



Carbon Motors Corporation was invited to participate in the Advanced Automotive Technology Symposium in Sacramento, California last week. The purpose of the event was to highlight some of the emerging technologies in the automotive powertrain space. Other participants included Bosch, BMW, Daimler, Mazda, Mitsubishi, and Volkswagen. Advanced clean diesel technology was not only featured as a prominent provider of both reduced fuel consumption and tailpipe emissions, but as a long-term, durable solution to reducing our dependence on foreign oil.



Carbon Motors set out to provide an optimum balance of performance and fuel economy in the E7 law enforcement patrol vehicle with the selection of its advanced clean diesel engines by BMW. Symposium guests were invited to experience that performance first-hand after looking over Carbon's E7 – the thrill of having 80% of the engine's torque available between 1100 rpm to 4200 rpm!



Law enforcement professionals spent extraordinary lengths of time gazing at the E7 and learning of its unique features and functionalities. They were then escorted over to participate in a very special ride-and-drive in vehicles with this type of advanced powertrain. It was fun to see the looks on the faces of both law enforcement officers and fleet administrators as they were pinned to the backs of their seats. One of the California Congressional Delegates was even spotted kneeling down to smell the exhaust because she couldn't believe how clean this advanced technology actually is!



All of those who participated agreed that Carbon's E7, coupled with the BMW advanced diesel engine, is the one and only breakthrough product for our brave women and men in uniform that put their lives on the line for us, every single day!

Auction: 1935 Bentley 3.5 Litre

We've seen our fair share of auto auctions over the years. At this point, it takes something truly rare and truly unique to catch our eye. The car in question has to be more than four wheels and a beautifully engineered engine, which explains why we're all riled over word that a 1935 Bentley 3 ½ Liter Saloon will be auctioned off by Historics at Brooklands. Yes, the car itself is something special. It wears a unique Flying B hood ornament – one of only three ever created – and has extensive documentation following nearly every mile on the odometer, but that's not what makes this particular lot so interesting.

You see, the car is being sold along with complete ownership of Freestone & Webb – the company that originally built the Bentley's special body way back when. The company is being auctioned off with neither assets nor debt, so the winning buyer will essentially have rights to the name alone. The coachbuilder hasn't built anything since closing its doors for good in 1958.

The Bentley and Freestone & Webb will be sold alongside a total of 65 other classics on June 2.

via:autoblog




Press Release

Classic Bentley to be auctioned, complete with free ownership of the company that built it

75 years after it was coach-built to the highest standards of the day, a 1935 Bentley will be auctioned at Brooklands on June 2 with a unique, free 'accessory' - ownership of the British coach-building company that created it.

Billed as one of the finest examples of its kind, the fine 1935 3 ½ litre Bentley Saloon is a jewel amongst 65 other fine classic and collector cars offered by specialist auction company, Historics at Brooklands.

Valued at between £75,000 - £90,000, the Bentley is offered by Historics with a comprehensive array of diaries documenting it's many trips in great detail. It is adorned with a single winged 'B' radiator mascot; believed to be one of only three examples of the experimental design ever produced, whilst the company which originally built the bespoke bodywork and interior of the car - Freestone & Webb - has even greater rarity value.

The renowned British coachbuilder was formed in 1923 by V.E. Freestone and A.J. Webb and, at its height, was producing 15 Rolls-Royces and Bentleys a year with exquisite hand-crafted bodywork and interiors. Freestone & Webb regularly exhibited at the London Motor Show and, for nine consecutive years, its excellence in the industry was recognised with the Gold Medal in the Private Coachbuilders competition.

Following the death of Webb in 1955, the company was taken over by HR Owen and continued to build bodies until 1958, after which the name was shelved.

The car's vendor discovered and acquired the company name and registered the limited company in 1990. It is now offered, together with the Bentley, as asset and debt free, offering a once-in-a-lifetime opportunity to own not only a fine motor car, but also an iconic piece of British automotive coachbuilding history.

For more information, and to attend the Historics at Brooklands auction on the evening of June 2, call 0800 988 3838, e-mail: auctions@historics.co.uk, or see the website, www.historics.co.uk. Entry by catalogue only, available prior to, or on the evening.

3-litre Bentley Saloon.

Christened 'The Silent Sports Car', the chassis of the 3 ½ litre Bentley Saloon was built from September 1933 in Derby alongside Rolls-Royce – and indeed designed under the influence of Sir Henry Royce - earning its moniker, in part, to excellent handling characteristics and a top speed of 97mph when adorned with the lightweight bodywork.

Despite early examples of the Bentley 3 ½ litre costing around £1,500, the unique blend of style, grace and performance proved popular amongst the inter-war elite, with over 70% of the cars built between 1933 and 1939 said to be still in existence some 80 years on.

A small selection of the 65 fine motorcars consigned to the first Historics of Brooklands auction on Wednesday, June 2, includes the following. Please visit
http://www.historics.co.uk/buying/online-catalogue.aspx for the full consigned list of vehicles.

High res photographs are available of all vehicles

1930 Bentley 4.5 litre Vanden Plas Tourer

A beautifully presented 1931 Bentley 4.5 litre boasts a well-documented and wonderful history, a fabulous finish with the correct engine and period-style supercharger. Examples of these important cars rarely come to the market, and a high level of international interest is expected £625,000 - £775,000

1955 Aston Martin DB2/4 Drophead Coupe

Very original, four owners from new, long-term owner since mid 80's
£110,000-£145,000

1954 Jaguar XK120 Drophead Coupe

Discovered in a barn after 20 years and recently re-commissioned
£48,000-£50,000

1987 Aston Martin Zagato Volante

Extremely rare, 1 of 37
£45,000-£60,000

1927 Rolls-Royce Phantom I

Body by Thrupp & Maberly. Engine, body and interior restored
£130,000-£155,000

1955 Jaguar XK120 Roadster

Stunning body on uprated XK140 chassis
£45,000-£55,000

1937 MG TA Special

All aluminium body, built to very high spec, demonstrated at Le Mans Classic 2004
£25,000-£35,000

1937 MG TA

Well-known 'Team Rosbif' racing T-Type. Raced extensively from early sixties onwards in the UK and Europe
£23,000-£28,000

1955 Ford Thunderbird

Imported to the UK in early 1960's
£12,000-£18,000

1969 Chevrolet Camaro 396 SS Convertible

Genuine numbers-matching 396SS in restored condition
£30,000-£40,000
1968 Ford Escort AVO Rally

Absolutely correct period rally car, beautifully restored.
£35,000-£45,000

1939 Rolls-Royce Silver Wraith by Mulliner & Co

A stunning Razor-Edge saloon with a 6,000 hour restoration.
£30,000-£40,000

Tesla to partner with Toyota to Build Electric Vehicle

Toyota Motor Corporation and Tesla Motors have announced that they intend to cooperate on the production of electric-vehicles, parts and production system and engineering support. Toyota will purchase a $50 million of Tesla’s common stock issued in a private placement to close immediately subsequent to the closing of Tesla’s currently planned IPO.

Toyota will invest $50 million for a private placement of Tesla common stock and the state of California will provide a sales tax abatement to Tesla for capital equipment expenditures to tool up the plant. Musk estimated that the abatement will amount to about $20 million over the next several years.

The NUMMI - New United Motor Manufacturing, Inc. - plant located in Fremont, only 17 miles from Tesla's new headquarters, ceased operations on April 1 after producing its last car, a red Toyota Corolla S believed to be destined for a museum in Japan.

The first car to roll of the production line will be Tesla's Model S electric sedan which costs around $57,400. While Tesla will still be late to the game when compared to the LEAF or the Volt, this amps up the company's reputation ten-fold. For a recent study just named Toyota as one of the top three companies consumers would buy an EV from.




Press Release

Tesla Motors and Toyota Motor Corporation Intend to Work Jointly on EV Development, TMC to Invest in Tesla

May 20, 2010 - Palo Alto, California, U.S.A. - Tesla Motors, Inc. (Tesla) and Toyota Motor Corporation (TMC) today announced that they intend to cooperate on the development of electric vehicles, parts, and production system and engineering support.

The two companies intend to form a team of specialists to further those efforts. TMC has agreed to purchase $50 million of Tesla's common stock issued in a private placement to close immediately subsequent to the closing of Tesla's currently planned initial public offering.

"I sensed the great potential of Tesla's technology and was impressed by its dedication to monozukuri (Toyota's approach to manufacturing)," said TMC President Akio Toyoda. "Through this partnership, by working together with a venture business such as Tesla, Toyota would like to learn from the challenging spirit, quick decision-making, and flexibility that Tesla has. Decades ago, Toyota was also born as a venture business. By partnering with Tesla, my hope is that all Toyota employees will recall that 'venture business spirit,' and take on the challenges of the future."

"Toyota is a company founded on innovation, quality, and commitment to sustainable mobility. It is an honor and a powerful endorsement of our technology that Toyota would choose to invest in and partner with Tesla," said Tesla CEO and cofounder Elon Musk. "We look forward to learning and benefiting from Toyota's legendary engineering, manufacturing, and production expertise."

TMC has, since its foundation in 1937, operated under the philosophy of "contributing to the society through the manufacture of automobiles," and made cars that satisfy its many customers around the world. TMC introduced the first-generation Prius hybrid vehicle in 1997, and produced approximately 2.5 million hybrids in the twelve years since. Late last year, TMC started lease of Prius Plug-in Hybrids, which can be charged using an external power source such as a household electric outlet. The company also plans to introduce EVs into the market by 2012.

Tesla's goal is to produce increasingly affordable electric cars to mainstream buyers – relentlessly driving down the cost of EVs. Palo Alto, CA-based Tesla has delivered more than 1000 Roadsters to customers in North America, Europe and Asia. Tesla designs and manufactures EVs and EV powertrain components. It is currently the only automaker in the U.S. that builds and sells highway-capable EVs in serial production. The Tesla Roadster accelerates faster than most sports cars yet produces no emissions. Tesla service rangers make house calls to service Roadsters.


Tesla Motors Announces Factory in Northern California
Silicon Valley factory will become the home of the Model S sedan

PALO ALTO, Calif. -- Tesla Motors has purchased the former NUMMI factory in Fremont, California, where it will build the Model S sedan and future Tesla vehicles. As recently as April of 2010, the NUMMI factory was used by Toyota to produce the Corolla and Tacoma vehicles using the industry-leading Toyota production system. It is one of the largest, most advanced and cleanest automotive production plants in the world.

It is capable of producing half a million vehicles per year or approximately 1 percent of total worldwide car production. The award-winning plant was the birthplace of the vaunted Toyota Production System, a widely copied system that lead to dramatic quality improvements and unprecedented manufacturing flexibility and worker satisfaction.

The Model S is expected to be the first pure electric premium sedan and is designed from the ground up to take full advantage of the electric vehicle architecture. The sedan, which Tesla unveiled in March 2009, has an anticipated base price of $49,900, including a federal tax credit, and is intended to deliver the foremost design and technology in the automotive world. With an optional extended-range battery pack, the Model S will travel over 300 miles per charge.

The factory is located in the city of Fremont near Northern California's Silicon Valley, very near Tesla's Palo Alto headquarters. The location means Tesla can hire best-in-class engineers in Silicon Valley. The short distance also ensures a tight feedback loop between engineering, manufacturing and other divisions within the company.

"The Tesla Factory effectively leverages an ideal combination of hardcore Silicon Valley engineering talent, traditional automotive engineering talent and the proven Toyota production system," said Tesla CEO Elon Musk. "The new Tesla Factory will give us plenty of room to grow."

Toyota produced its last car there just last month. Tesla began discussions to acquire the site this spring, when it was also evaluating opportunities in Downey and Long Beach. The turnkey nature of the facility with its recent production of top quality vehicles and its considerable room for expansion made it stand out from other sites.